Certain plumbing issues such as tap leaks, clogged sinks, shower leaks, faulty flush valves etc. are too minor to call for the involvement of an expert. These problems can even be fixed by a novice provided that the correct logic and the right set of plumbing tools are used.
One such issue is the replacement of the flush valve of your toilet. Beforehand make sure that the flush valve actually requires a replacement and it can’t be fixed.
Foremost thing to do before commencing any plumbing project is to notify yourself about the availability of the required plumbing tools. Do you have all those essential plumbing tools such as wrenches, screwdrivers, Teflon tape etc. in tact ? Also make sure that you’ve turned off the main water supply prior to the repair work.
Next, open the lid of the tank and empty it by either flushing down the water or removing it with a small container. If still some water is left in the tank then clean it out using a piece of cloth. Now start dissociating the valve chain that is attached to a trip arm in the underlying setup.
After removing the valve chain, lift the clips of the flush valve or flapper from it’s bindings on the sides of the overflow tube such that the flapper is detached from the flush valve seat. Make sure that no damage is done to the affiliated fixture. Not all the flush valves are attached to the flush valve seat in the same manner hence, the method of detachment may vary. Dissociate the flush valve completely from the fixture and take it down to a local plumbing or hardware store to buy a new flush valve with the same functions as the old one. If the new valve deters from the old one in terms of it’s flapper style or clipping, then it may not fit tightly on the flush valve seat.
Place the new flush valve on the flush valve seat and bind the clips to the fixture on both sides of the overflow tube. Once clipped, check the flapper to make sure it rests flat on the flush valve seat.
Attach the valve chain to the trip chain again and finish off the installation of the new flush valve.
Turn off the water supply valve situated at the bottom of the tank. Examine the flush valve and the affiliated setup for it’s normal operation.
Scott Rodgers is a distinguished writer who has been providing great guidance on plumbing works all over the nation. His splendid knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Dunn Loring Plumbers to Krum Plumbers.
Loading ...
